Your floors need particular protection when undergoing remodeling, during new development, moving heavy furniture or equipment, and for different occasions beyond day-to-day use. Protecting flooring makes sense and saves money. A spill of paint, the drop of a hammer, a scratch from heavy furniture can price 1000’s of dollars in replacement and repair costs. This article describes surface protection products for floors so that you can make knowledgeable selections on the best product to use for your needs.

Types of Protection Packaging:

Floor protection products are commonly packaged as either:

(1) Products by the roll: These include common adhesive films, rolled paper products and rolled textile protection. Protective supplies purchased by the roll are commonly measured in thickness by mils (e.g., 2.5 mils thick as much as forty eight mils thick).

(2) Products by the sheet: These include corrugated plastic, masonite, and different inflexible protection. Protective materials purchased by the sheet are commonly measured in thickness by the inch (e.g., 1/four-inch thick) and usually come as 4 toes by 8 feet.

Type of Flooring Protection:

Paper

Paper protection is suitable for all hard surfaces and resilient surfaces however doesn’t work well to protect carpets as it can tear when flexing under footsteps. Paper products are breathable in order that glue fumes and cement curing vapors can escape. One disadvantage to paper products as they require tapes to safe them to flooring and tapes can typically leave adhesive residue when removed. Frequent paper protection products embody:

· A coated compressed paper board 38 mils thick that is breathable, waterproof and made from recycled paper.

· Kraft paper is a lightweight brown paper that’s cheap but doesn’t afford any impact protection and might simply tear

· Scrim paper could incorporate coatings or reinforcements to make them water-resistant as well as scrim threads to bolster the paper and forestall tearing. These improved papers are longer lasting than regular Kraft paper or rosin paper nonetheless they’re also too thin to supply a lot impact protection.

· Rosin paper is thicker than Kraft paper and may be very low cost. Rosin paper is recycled, felt paper that ranges from 9.0 to 11.5 mils thick. The huge drawback of using Rosin paper is that it could cause a permanent stain if the paper gets wet. Rosin paper may also rip simply so it not normally really helpful for use

· Corrugated cardboard rolls or sheets can be used to protect flooring. Corrugate provides impact protection nevertheless it just isn’t coated with a water resistant finish and needs to be kept dry always so that it does not disintegrate. Cardboard products are additionally available as single-, double-, and triple-walled corrugated cardboard sheets or as a fan-folded stack.

Polyethylene Film

Polyethylene (PE) films are sold as self adhesive rolled films varying from 2.0 as much as 3.5 mils in thickness. They trap any moisture from escaping so that they should not be used on any floors which might be curing. Two of the nice benefits of polyethylene films are that films will flex and contour so they can be used on carpets as well as hard surfaces. These films don’t provide any impact protection and are usually rated for short term use of 30 to 90 days only. Polyethylene films are designed for one-time use and do not use recycled materials making them a poor alternative in sustainable protection. Protection films are available in a variety of adhesion “tack”. Hard surface protection films can have a decrease tack and colour than carpet protection which wants a more aggressive glue to hold onto carpet fibers successfully.

Wood Products

Plywood and Masonite are commonly used as protection on commercial projects with a number of foot traffic. Masonite is a wood product made from wood fibers unlike plywood which is an actual sheet of thin wood. Both plywood and Masonite are sold in the usual size of 4 toes by eight feet and are more costly per sq. foot than paper or polyethylene products. Masonite is commonly 1/eight or 1/4 inch thick. Plywood is commonly 1/4 inch to 3/4 inch thick. Both products provide impact protection on quite a lot of floor types and provide adequate protection against heavy equipment use or furniture moving. Each plywood and Masonite are breathable and reusable nonetheless they’re bulky to carry and store. These wood sheets needs to be used on high of a softer protection comparable to a rolled textile as they easily scratch flooring. These sheets work well to protect carpet as they prevent wrinkles when rolling heavy loads over the carpet. Plywood and Masonite don’t provide moisture protection and will be harder to chop to dimension than other protection types.